the EB-5ES-PSE combines the ultra-reliability of a 5 port sixnet industrial ethernet switch with four industrial poe sourcing outputs. features & benefits > iee 802.3af compliant poe ports ? power sourcing equipment (pse) operation ? auto-detection of pd (powered devices) ? over-temperature and over-current detection ? over and under-voltage detection > real-time network operation ? intelligent message routing - no collisions! ? supports all standard ieee 802.3 protocols > true plug-and-play simplicity ? auto-sensing for speed and duplex ? auto-mdi/mdix-crossover and auto-polarity ? automatic poe power management EB-5ES-PSE industrial poe switch sixnet networking series 5 port power over ethernet industrial switch simply power this switch with 48 vdc to source the poe lines. the four poe ports automatically sense and support both poe and non-poe (traditional) ethernet devices. or power this switch with 10-30 vdc and it functions as a robust 5 port industrial switch that is poe future-ready. applications > video and security > industrial automation and control > process xxxxx and motion control product highlights > four fully ieee-compliant poe ports > slim packaging fts on your din rail > plug and play saves you time and money > truly industrial rated for any application > trouble free operation ? truly industrial -40 to 75c operation ? dual power inputs with surge protection ? din rail or direct panel mounting ? ul / csa (cul), ce, hazardous locations and maritime rated > networking features ? store and forward wire speed switching ? automatic address learning, aging and migration ? full-duplex operation with fow control ? auto crossover (mdi/mdix) and auto polarity complian t
mechanical din rail or direct panel mounting lexan case with ip30 protection dimensions - see mechanical diagram weight (approximate) 0.17 kg (6 oz) all specifcations are subject to change. consult factory for latest info. orderin g guide part number description EB-5ES-PSE-1 5 rj45 10/100 ethernet ports including 4 poe (pse) ports EB-5ES-PSE-2sc 4 rj45 poe (pse) ports and 1 multimode EB-5ES-PSE-2st (special order) fiber port with sc or st style connector for up to 4 km EB-5ES-PSE-3sc 4 rj45 poe (pse) ports and 1 singlemode EB-5ES-PSE-3st (special order) fiber port with sc or st style connector for up to 20 km eb-pd-24v-1 poe splitter for non poe devices eb-ps-ac48-75 ac to 48 vdc, 75w power supply contact red lion for special or long haul fber transceivers up to 120 km. adld0152 062614 ? 2014 red lion controls 5 port power over ethernet industrial switch specifications switch features ethernet switch ports 5 total with 4 poe (pse) unmanaged, store and forward, wire speed ethernet protocols supported all ieee 802.3 rj45 ports (shielded) 10/100basetx rj45 speed (10 or 100 mbps) auto-negotiation rj45 mdi/mdix auto-crossover and td/rd auto-polarity ethernet isolation 1500 vrms 1 minute fiber optic port speed / 100basef (100 mbps) full duplex fiber optic port wavelength 1300 nm (others available) fiber multimode (mm) typical 50 or 62.5/125 um (sc or st) fiber singlemode (sm) typical 9 or 10/125 um (sc or st) fiber max. distance (full duplex) 4 km (mm), 20 (sm) or 40 km (long haul) or more typical latency for 100 mbps ports 5 us + frame time; varies on load mac addresses and bandwidth 1024 and 3.2 gbps power input and poe output power input with reverse polarity protection; 10-30 vdc with no poe output; 45-56 vdc for poe output switch power consumption (typ.all ports active at 100 mbps): 2.0 w (5-port without fiber) + poe; 3.0 w (5-port with 1 fiber) + poe poe power consumption up to 15.4 w per port rj45 pin assignments for poe: tx/v- (3, 6); rx/v+ (1, 2) power input transient protection 15,000 watts peak power input spike protection 5,000 watts (10 times for 10 us) poe operation - auto power management poe disconnect mode - dc disconnect poe auto-detection per ieee 802.3af poe protection - over-temperature, over-current, over/under-voltage and transient ethernet compliance ieee 802.3af (power over ethernet) ieee 802.3 (10mbps ethernet for legacy devices) ieee 802.3u (100mbps ethernet for newer devices) ieee 802.3x (full-duplex with flow control) environmental operating temperature range -40 to +75 c (cold startup @ -40) storage temperature range -40 to +85 c humidity (non-condensing) 5 to 95% rh vibration, shock and freefall iec60068-2-6, -27 & -32 standards compliance electrical safety - ul508 / csa c22.2/14; en61010-1, ce emi emissions - fcc part 15, ices-003; en61000-6-4, ce emc immunity - en61000-6-2, ce hazardous locations: ul1604/csa c22.2/213 (class i, div. 2); en60079-15 (zone 2, category 3), ce (atex) marine and offshore rated per abs eye safety (fiber models) iec60825-1, class 1; fda 21 cfr1040.10 and 1040.11 dimensions americas sales@redlion.net asia-pacifc asia@redlion.net europe middle east africa europe@redlion.net +1 (717) 767-6511 as the global experts in communication, monitoring and control for industrial automation and networking, red lion has been delivering innovative solutions for over forty years. our award-winning technology enables companies worldwide to gain real-time data visibility that drives productivity. product brands include red lion, n-tron and sixnet. with headquarters in york, pennsylvania, the company has offces across the americas, asia-pacifc and europe. for more information, please visit www.redlion.net. red lion is a spectris company. www.redlion.net connect. monitor. control.
|
